*Click for see table

KEMAMPUAN KALIBRASI DAN PENGUKURAN (CMC) LABORATORIUM KALIBRASI
No Jenis Alat atau standar atau bahan yang dikalibrasi atau diukur Rentang ukur Expanded Uncertainty (at 95% c.l.)*) Metode Kalibrasi; Dokumen Standar dan Spesifikasi (Bila Relevan) Kapasitas, nilai nominal Resolusi atau nilai skala terkecil
Temperatur dan kelembapan
1 Oven 25 °C ~ 200 °C 0,28 °C AS2853-1986 (-30 – 200)°C 0,01°C
Furnace 30 °C ~ 1000 °C 2,5 °C ASTM E991A – 1998 (-20 – 200)°C 0,1°C
Water / Oil Bath 30 °C ~ 200 °C 0,28°C AS2853-1986 (-30 – 800) °C 0,1°C
Autoclave 30 °C ~ 200 °C 0,28°C BS 2646-5:1993
Mooney Viscometer 100 °C ~ 200 °C 0,28°C Manual operation (-30 – 800)°C 0,1°C
Incubator 0 °C ~ 200 °C 0,12 °C AS2853-1986
Hot Plate 25 °C ~ 200 °C 0,14 °C Manual operation
COD Reactor 25 °C ~ 200 °C 0,28 °C Manual operation
Refrigerator -20 °C ~ 20 °C 0,12 °C AS2853-1986 0,07 °C JIS Z 8710 – 1993
Massa
1 Anak Timbangan 0,001 g ~ 0,50 g 0,033 mg OIML R111-1 : 2004 1mg-200g E2
1 g 0,034 mg
2 g 0,035 mg 200 g 0,01 mg (80 g)
5 g 0,037 mg 0,1 g (>80 g)
10 g 0,039 mg
20 g 0,042 mg
50 g 0,045 mg
100 g 0,13 mg
200 g 0,16 mg
2 Timbangan (Elektronik, mekanik) 0 g ~ 50 g 0,10 mg CSIRO – 2007 Monograph 4 (Morris & Fenn) 1mg-200g E2
50 g ~ 100 g 0,10 mg
100 g ~ 200 g 0,10 mg 1mg-200g F1
200 g ~ 500 g 0,11 mg
0,5 kg ~ 1 kg 1,3 mg 500 g F1
1 kg ~ 2 kg 1,9 mg
1 kg F1
Tekanan
3 Pressure Gauge 0 psi ~ 145 psi 0,17 psi DKD-R 6-1 (2003) 145 psi 0,01 psi
Volume dan Aliran
4 Volumetric 0 μL ~ 10 μL 0,04 μL DKD-R 8-1 (2011) 200 g 0,01 mg (80 g)
10 μL ~ 50 μL 0,04 μL 0,1 g (>80 g)
50 μL ~ 100 μL 0,04 μL
100 μL ~ 200 μL 0,04 μL
200 μL ~ 500 μL 0,05 μL
500 μL ~ 1000 μL 0,08 μL
0 μL ~ 10 μL 0,002 μL ASTM E542-2001 200 g 0,01 mg (80 g)
10 μL ~ 50 μL 0,003 μL 0,1 g (>80 g)
50 μL ~ 100 μL 0,011 μL
100 μL ~ 200 μL 0,015 μL
200 μL ~ 500 μL 0,029 μL
500 μL ~ 1000 μL 0,073 μL
1000 mL ~ 2000 mL 0,61 mL
Gaya
5 Plastimeter 9800 gf ~ 10200 gf 3,6 gf Manual operation 10kg M3
5 kg M1
1 g – 200 g M1
2 kg (2 buah) M1
500 g M1
Panjang, Dimensi dan Sudut
6 Thickness Gauge 0,1 mm ~ 5 mm 1,9 μm USBR-1007 (1989 1 mm – 100 mm Kelas 1
5 mm ~ 20 mm 2,0 μm M1
Blending Mill 0,3 mm ~ 1,7 mm 0,02 mm SIR Manual – 1968 0 – 150 mm 0,01 mm
Panjang, Dimensi dan Sudut
7 pH-meter 0 pH ~ 14 pH 0,026 pH ASTM E70 – 2002 4, 7, 10 pH
Conductivity meter 1278 mS/cm ~ 1413 mS/cm 10 mS/cm ASTM D1125 – 1999 1413 mS/cm
Turbiidity meter 20 NTU 1,1 NTU ASTM D1889 – 2000 20, 200, 800 NTU
200 NTU 11 NTU 2 kg (2 buah)
800 NTU 53 NTU 500 g

 

Calibration Lab


Calibration, better way for maintaining accuracy of equipments

What is Calibration?

That is comparisons process linking, direct or indirectly, of measuring instruments with the standard instruments and traceable to the SI units by means of an unbroken chain.

What are benefits of Calibration?

  1. Maintaining accuracy of the equipments,
  2. Assuring the quality of measuring instruments that measuring resolts are valid,
  3. Assuring the quality of product,
  4. To folfill requirements of the accreditation body.

Our Services

  1. Mass
  2. Volumetric
  3. Force
  4. Temperature
  5. Fluid Dynamic
  6. Pressure
  7. Dimension
  8. pH-Meter
  9. Spechtrometer UV-Vis
  10. Atomic Absorption Spectrophotometer ( AAS )
  11. Gas Liquid Chromatography ( GLC )
Download brochure here.

If you are interested in this product please call the telephone number on the right to contact us

Please call ……

(62-21) 4717001, 29688694